Although the mesocarbon microbead drying equipment has many advantages when it is running, you should know that there will be some failures after a long time. In order to avoid frequent failures during use, we must do it well. Its maintenance work and maintenance. This is very important, let's talk about the method for everyone. I hope it can help you.

People who have used the mesophase carbon microsphere drying equipment should know that this product will also have some minor hair problems during operation, but these problems will be avoided as long as we do a good job of maintenance at ordinary times. As a manufacturer, we remind everyone to do a good job of daily maintenance after using the mesophase carbon microsphere drying equipment. During the operation of the intermediate phase carbon microsphere drying equipment, attention should be paid to whether there is abnormal noise and vibration in the machine. At this time, attention should be paid to observe whether there is liquid leakage inside. If there is abnormal sound and leakage in the operation of the machine, it is necessary to stop the operation of the machine in time and practice maintenance personnel to carry out maintenance. Or you can contact the manufacturer of the purchase and tell them this kind of problem. Generally, as long as it is a regular manufacturer, it will help everyone to deal with these problems in time. In addition, check the oil level in the gearbox every day after the equipment stops operating. If the oil level is not at the standard value, you can remove and fill the oil to the center of the oil mark. As long as these jobs are done well, problems will not often occur.

In addition, the mesocarbon microbeads drying equipment in use also need to do a good job is the weekly inspection and maintenance. This is also a very important point. In fact, the weekly inspection and maintenance of the mesocarbon microsphere drying equipment is relatively simple, specifically the inspection and maintenance of the mesocarbon microsphere drying equipment that has not been used for a long time. If it has stopped working for more than a week, its body parts may not be able to operate normally, so turn on the power supply during the next operation, and then check whether some parts inside can work normally. If the equipment has been used for more than three months, then the internal parts are likely to be loose at this time, and work accidents are likely to occur regardless of the continued use of the equipment. Therefore, it is also necessary to tighten the nut inside. As long as you do these tasks well, you can extend its service life. If you still don't understand, you can call for advice. This company is guaranteed in terms of quality. Moreover, it is well-known in the industry. If you want to find a manufacturer to cooperate, then this place is definitely worthy of your trust.

After the introduction of the above contents, we have also seen that the maintenance of the drying equipment of mesophase carbon microspheres is very important. I hope the staff will pay attention to it. If you still have something you don't know, please take a look at it. I hope the content brought today can bring help to relevant people.

No. 155, Kuanting Street, Circular Chemical Industry Park, High-tech Industrial Development Zone, Shijiazhuang City, Hebei Province

Phone
+8613933883976

Email
13933883976@163.com