1. Material characteristics:

ternary precursor materials, I .e.nickel cobalt manganese hydroxideThe chemical formula isNixCoyMnz(OH)2 ternary composite cathode material precursor, nickel salt, cobalt salt, manganese salt as raw materials, the ratio of nickel cobalt manganese (x:y:z)Can be adjusted according to actual needs.

The ternary material and the precursor are loose powder, but the fluidity is not good. According to the production process, the ratio and the particle size are different, the water content before drying is generally about 10% ~ 20%, and the water content of the product after drying is about 0.2.

2. Special drying process:

The drying of ternary materials and precursors and spherical nickel hydroxide (spherical nickel) has the following characteristics and requirements: the materials are loose, but the fluidity is not poor; It is required that the energy consumption is low, the materials are evenly heated, the operating environment is good, and the index requirements are met at one time. Strict requirements for new magnetic substances in the drying process (generally <30ppb); The materials are fine and dust collection is difficult.

However, the traditional hot air drying and the emerging microwave drying and far infrared drying have their own shortcomings rather than the ideal choice for ternary materials and precursors and spherical nickel hydroxide (spherical nickel) drying. For example, hot air drying has the disadvantages of high energy consumption (thermal efficiency is only 30%-40%), poor operating environment (large dust), etc, microwave drying has the disadvantages of large equipment investment, uneven material drying and difficult to meet the index requirements, "hot spot" and "thermal runaway" phenomenon in the heating process, easy damage to components, etc. Far infrared drying has the disadvantages of complex structure and difficult heating and high energy consumption.

According to material analysis and many years of engineering experience, Hebei Yanming Chemical Equipment Co., Ltd. has successfully used energy-saving and environment-friendly disc continuous dryer as ternary material and precursor drying equipment, and has provided drying system solutions for many manufacturers of this material.

The ternary material precursor wet material transported from the previous process is continuously and quantitatively added into the energy-saving and environment-friendly disc-type continuous dryer by the quantitative feeder for drying operation. The material completes the heat and mass transfer process in the flow process to achieve the purpose of drying. After the dry material is cooled in the dryer to reach the packaging temperature (usually at 50 ℃), it is discharged from the discharge port at the bottom into the packaging equipment for packaging, and the tail gas escaping from the material is discharged from the wet discharge port at the top of the dryer after dust removal.

3. Process characteristics:

Continuous operation, high thermal efficiency. Since the energy-saving and environment-friendly disc continuous dryer is dried by conduction and heat transfer, air (or a very small amount of air) is not passed into the dryer during the drying process, and its tail gas carrying capacity is very small, so its thermal efficiency can reach more than 85%;

② Less material loss and good operating environment. In the energy-saving and environment-friendly disc continuous dryer drying ternary material precursor, because the material goes in and out, the material distribution is wet and dry, and the flow rate of drying tail gas is extremely low (about 0.1 m/s), the material dust is difficult to float to the top of the equipment, and is rarely carried away by the tail gas, which not only does not lose the material, but also does not pollute the environment, thus meeting the requirements of environmental protection. The whole drying system is closed operation, the exhaust gas adopts a specially designed dust collector, which can recover more than 99.9% of the dust;

The adjustable equipment, material drying uniform adjustable. The effect of material drying can be conveniently adjusted by adjusting the speed of the equipment, adjusting the thickness of the material layer, the flow rate of the heat source, the temperature of the heat source, the number of rake arms, the form, size and angle of rake leaves, the amount of material added and the number of drying trays in the dryer;

④ Stable operation, long service life and simple operation;

⑤ The material flow direction is single, there is no backmixing phenomenon, the drying is uniform, the quality is stable, and there is no need to mix again;

The use of special materials to ensure that the product requirements for magnetic substances. For the worn parts (such as the inside of the feeder, the rake leaf and the drying plate of the plate dryer), non-metallic materials or lining non-metallic materials or other metal materials without magnetic substances are used to ensure the requirements of the product on magnetic substances;

⑦ Each layer of drying tray can be separately introduced into the heat medium or cold medium to heat or cool the materials, and the upper part of the drying and lower part of the cooling can also be realized in one device, and the temperature control of the materials is accurate and easy;

The heat source is flexible to use. According to the different conditions of the use of on-site heat source supply, steam or heat transfer oil (electric heating or natural gas heating or coal heating or gas heating) can be used as heat source;

⑨ For the small particles in the wet material, the special crushing device is added to the appropriate position inside the dryer, so that the small particles are crushed into powder, which can strengthen the heat transfer and drying process and ensure the uniformity of the dry material;

⑩ Easy installation, small footprint. The dryer is delivered as a whole and transported as a whole. It only needs to be hoisted in place, and the installation and positioning are very easy. Due to the layer-by-layer arrangement and vertical installation of the drying tray, even the drying area is large and the floor area is small.